Pullon kantohihnat ja -hihnat

  • Turns any standard PET bottle into something you can wear.
  • Three grips: stretch silicone ring, hard plastic bracket, or a cord sling.
  • Crossbody length (about 126 cm) for hip-height carrying, or a short strap with a carabiner.
  • Full-colour sublimation on the strap, or a woven label for a retail look.
  • From EUR 0,89 at 100 pieces.

Someone at an outdoor event is holding a phone, a programme and a bottle of water. One of those three is about to be put down and forgotten, and it is always the bottle. A carrying strap solves that by making the bottle wearable — which is also why this is one of the few promotional items that keeps getting used after the event.

Three ways to grip a bottle

Grip How it holds Sopii
Stretch silicone ring Slips over the bottle neck and grips by tension The cheapest and most flexible. Fits a range of neck sizes; quick to put on and take off.
Hard plastic bracket Snaps rigidly around the neck of a standard PET bottle Movement. Marathons, charity runs, festivals — it stays attached when the wearer does not stay still.
Round cord sling A loop in a thick two-tone cord, with a woven label The retail-looking option. Reads as an accessory someone bought, not as merchandise they were given.

Two lengths, two behaviours

Crossbody, at about 126 cm, wears over one shoulder and hangs the bottle at hip height. Both hands stay free and the bottle stops being something you have to think about. This is the version that survives past the event.

Short strap with a carabiner clips the bottle to a bag, a belt loop or a rucksack strap. Cheaper, smaller to ship, and the sensible choice when several thousand are going into delegate bags.

Brändäys

A flat polyester strap sublimates in full colour along its whole length — a big print area for the money, and different artwork on each side costs nothing extra. A cord sling carries a woven label instead: less brand surface, considerably more perceived value. The grip is normally left plain because it sits under the bottle where nobody looks.

Tekniset tiedot

  • Grips: stretch silicone ring, hard plastic bracket, or cord loop
  • Pituudet: crossbody about 126 cm, or short strap with a zinc alloy carabiner
  • Hihnat: flat polyester, or 0,7 cm two-tone round cord
  • Brändäys: full colour sublimation, screen print, or woven label
  • Fits: standard PET bottle necks
  • Minimitilaus: 100 kappaleesta alkaen
  • Toimitusaika: noin 2–3 viikkoa hyväksytyn kuvamateriaalin jälkeen

Usein kysyttyjä kysymyksiä

Which grip holds the bottle best?

A hard plastic bracket snaps around the bottle neck and is the most secure during movement — the right choice for marathons and anything involving running. A stretch silicone ring is quicker to fit, works across a wider range of bottle necks and is the cheapest. A cord sling with a loop looks the best and behaves like a retail accessory rather than event merchandise.

Does it fit any bottle?

Standard PET bottle necks — mineral water, soda, juice — yes. Wide-mouth sports bottles and insulated steel bottles usually need their own solution, because the neck diameter and weight are both different. Tell us which bottle it has to carry and we will match the grip to it.

Crossbody or short strap?

Crossbody, at about 126 cm, hangs the bottle at hip height and leaves both hands completely free — the version people keep using after the event. A short strap with a carabiner clips to a bag or a belt loop and takes up less space, which suits handing out in volume.

How is it branded?

A flat polyester strap takes full-colour sublimation across its whole length, which is a large print area for the price. A cord version carries a woven label instead, which looks deliberately understated. The grip itself is usually left unbranded because it is under the bottle and out of sight.

How is this different from a cup holder lanyard?

A cup holder lanyard is built for an event cup at a festival bar — wide, open, and suunnittelued for the cup to be dropped in and lifted out repeatedly. A bottle strap grips a sealed PET bottle by the neck and is meant to stay on. Different object, different event. See cup holder lanyards if you are running a deposit system.

Mikä on pienin tilausmäärä?

From 100 pieces, about two to three weeks from approved artwork. The silicone ring version is the cheapest; the two-tone cord sling with a woven label is roughly three times the price and looks it.

Muut kaulanauhat

Rakenteellisesti: painettu polyesteri ja nailon, pyöreä johto, jacquard-kudottu, putkimainen, satiini, neopreeni, silikoni ja PVC. Aineiston tarinan mukaan: luonnonmateriaalit, muoviton ja istutettavissa, kierrätetty rPET. Sen sisällön perusteella: merkkinauhakelat ja kiinnikkeet, bottle straps, puhelimen kiinnityshihnat, latauskaapelit, pullonavaajat. Viimeistelyn mukaan: erikoistehoste, heijastava ja hyvin näkyvä. Koko valikoima: Kaulanauhat.

Pyydä tarjouspyyntö






    Lähetä logo (enintään 20 Mt):